스테인리스강은 가장 기본적인 의료 재료입니다. 또한 포트웨인메탈에서 와이어로 인발한 최초의 재료입니다.
We begin the stainless steel drawing process with our carbide dies for diameters greater than 2.54 mm [0.100 in]. From there, we transition to our polycrystalline dies for diameters between 2.54 mm [0.100 in] and 1.016 mm [0.040 in]. These two die types provide a relatively rough surface which can be enhanced with additional finish treatments. Our single crystal natural diamond dies will take your stainless steel wire from 1.016 mm [0.040 in] all the way down to our fine wire sizes. As stainless steel wire gets drawn to the finer sizes, it develops a more polished appearance.
스테인리스 강은 많은 중요한 응용 분야에서 코발트-크롬, 타이태늄 또는 나이티놀 같은 재료로 대체되었지만, 다목적성과 비교적 낮은 비용으로 인해 의료 기기에서는 여전히 가장 일반적으로 사용되고 있습니다. 포트웨인메탈은 일상적으로 다음과 같은 등급의 써지컬스틸을 취급합니다.
여기서 "V"는 정밀 청정도 및 균질성이 향상된 진공 재융합 재료를 나타냅니다.
또한 광범위한 DFT® 복합재에 스테인리스강을 사용하고 있습니다.
스테인리스강이 필요하십니까? 당사에 문의해 주십시오.